Terms & Conditions
Our aim is to provide the most accurate professional opinion based on the current state of the property at the time of our inspection only.
This inspection report is intended for whom it is addressed only and no other parties. No responsibility is accepted to any party who rely on the content of this report.
Pre-Purchase inspection reports are NOT intended for legal proceeding and/or NCAT disputes.
All inspections by Double Chex Pty Ltd are completed on a case by case basis. In turn, all vehicles have different systems and measures in place which are all subject to some variance with every inspection.
All inspections are largely visual based with no mechanical components removed and/or reworks completed unless specified by the authorised owner and/or operator.
Faults codes present on the vehicle are read only and are not cleared before a proper diagnosis is completed.
The engines internal compression has not been tested.
Our inspections cannot be used as roadworthy certificates.
Speciality systems which may/or may not be installed in the vehicle cannot be internally inspected and/or overhauled due to the complex design. These systems include, but not limited to, the ABS module, electric steering, and Airbag systems.
Any issues that may arise from the course of inspections will require further diagnostics in order to accurately give proper advice on rectifying the issue.
All inspections are completed by a competent mechanical professional with all relevant certificates. All credentials can be supplied upon request.
Due to the nature of inspections completed, no warranties and/or guaranties shall be unless components are correctly removed, inspected and tested as per manufactures standards.
This inspection report is intended for whom it is addressed only and no other parties. No responsibility is accepted to any party who rely on the content of this report.
Pre-Purchase inspection reports are NOT intended for legal proceeding and/or NCAT disputes.
All inspections by Double Chex Pty Ltd are completed on a case by case basis. In turn, all vehicles have different systems and measures in place which are all subject to some variance with every inspection.
All inspections are largely visual based with no mechanical components removed and/or reworks completed unless specified by the authorised owner and/or operator.
Faults codes present on the vehicle are read only and are not cleared before a proper diagnosis is completed.
The engines internal compression has not been tested.
Our inspections cannot be used as roadworthy certificates.
Speciality systems which may/or may not be installed in the vehicle cannot be internally inspected and/or overhauled due to the complex design. These systems include, but not limited to, the ABS module, electric steering, and Airbag systems.
Any issues that may arise from the course of inspections will require further diagnostics in order to accurately give proper advice on rectifying the issue.
All inspections are completed by a competent mechanical professional with all relevant certificates. All credentials can be supplied upon request.
Due to the nature of inspections completed, no warranties and/or guaranties shall be unless components are correctly removed, inspected and tested as per manufactures standards.
